3-38 OM 803 us – Edition 3.7 * * 803b330.fm
Operation
Seat belt C is for the operator’s safety.
Fastening the seat belt:
☞Fasten the seat belt as follows before starting the machine:
• Hold belt on buckle latch A and run it slowly and steadily over the hips to buckle B
• Insert buckle latch A into buckle B until it engages audibly (pull test)
• Tighten the seat belt by pulling at its end
➥The seat belt must be tightly in place over the hips!
Unfastening the seat belt:
☞Unfasten seat belt C as follows:
• Hold the seat belt
• Press button D on buckle B
➥Latch A is released by spring pressure
• Unfastening the seat belt
Longer/shorter seat belt adjustment:
☞Lengthen the seat belt as follows:
• Hold buckle latch A at a right angle to the seat belt and pull the seat belt to the
required length
• To shorten the seat belt, just pull the free end E of the belt
Fig. 91: Fastening the seat belt
C
B
A
Fig. 92: Unfastening the seat belt
C
B
A
D
Fig. 93: Longer/shorter seat belt adjustment
A
E
To Next Page
Loading...
