14 Important Notes WAGO-I/O-SYSTEM 750
750-461 2AI Pt100/RTD
Manual
Version 1.4.1
Replace defective or damaged devices!
Replace defective or damaged device/module (e.g., in the event of deformed
contacts).
Pos: 18.15.3 /Alle Ser ien (Allgemeine Module) /Sicherheits- und son stige Hinweise/Ac htung/Achtung: Gerät e vor kriechenden und iso lierenden Stoffen schü tzen! @ 6\mod_1260181036216 _21.docx @ 46747 @ @ 1
Protect the components against materials having seeping and insulating
properties!
The components are not resistant to materials having seeping and insulating
properties such as: aerosols, silicones and triglycerides (found in some hand
creams). If you cannot exclude that such materials will appear in the component
environment, then install the components in an enclosure being resistant to the
above-mentioned materials. Clean tools and materials are imperative for
handling devices/modules.
Pos: 18.15.4 /Alle Ser ien (Allgemeine Module) /Sicherheits- und son stige Hinweise/Ac htung/Achtung: Reinigu ng nur mit zulässigen Mater ialien! @ 6\mod_1260 181203293_21.doc x @ 46751 @ @ 1
Clean only with permitted materials!
Clean housing and soiled contacts with propanol.
Pos: 18.15.5 /Alle Ser ien (Allgemeine Module) /Sicherheits- und son stige Hinweise/Ac htung/Achtung: Kein Kon taktspray verwenden! @ 6\mod_1260181290808_ 21.docx @ 46755 @ @ 1
Do not use any contact spray!
Do not use any contact spray. The spray may impair contact area functionality in
connection with contamination.
Pos: 18.15.6 /Alle Ser ien (Allgemeine Module) /Sicherheits- und son stige Hinweise/Ac htung/Achtung: Verpo lungen der Daten- und Versor gungsleitungen vermeiden! @ 6\mod_1260184045 744_21.docx @ 46767 @ @ 1
Do not reverse the polarity of connection lines!
Avoid reverse polarity of data and power supply lines, as this may damage the
devices involved.
Pos: 18.15.7 /Alle Ser ien (Allgemeine Module) /Sicherheits- und son stige Hinweise/Ac htung/Achtung: Elek trostatische Entlad ung vermeiden! @ 6\mod_126018 1364729_21.docx @ 46759 @ @ 1
Avoid electrostatic discharge!
The devices are equipped with electronic components that may be destroyed by
electrostatic discharge when touched. Please observe the safety precautions
against electrostatic discharge per DIN EN 61340-5-1/-3. When handling the
devices, please ensure that environmental factors (personnel, work space and
packaging) are properly grounded.
Pos: 19 /Dokumentation al lgemein/Glieder ungselemente/---Seitenwec hsel--- @ 3\mod_122110804 5078_0.docx @ 21810 @ @ 1
To Next Page
Loading...
Need help?
General
