WAGO-I/O-SYSTEM 750 Mounting 39
750-461 2AI Pt100/RTD
Manual
Version 1.4.1
Pos: 27.10 /Serie 750 (W AGO-I/O-SYSTEM)/Montieren/Demonti eren/I/O-Modul en tfernen @ 4\mod_123916937 5203_21.docx @ 30334 @ 3 @ 1
5.2.2 Removing the I/O Module
1. Remove the I/O module from the assembly by pulling the release tab.
Figure 8: Removing the I/O Module (Example)
Electrical connections for data or power jumper contacts are disconnected when
removing the I/O module.
Pos: 28 /Dokumentation al lgemein/Glieder ungselemente/---Seitenwec hsel--- @ 3\mod_122110804 5078_0.docx @ 21810 @ @ 1