WAGO SYSTEM 750 - Table 22: Status Byte S2

34 Process Image WAGO-I/O-SYSTEM 750
750-493 3-Phase Power Measurement Module
Manual
Version 1.2.0
Table 22: Status Byte S2
Status Byte S2
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
Reg_Com
Err_L3
Channel_ID
ProcDat_ID
ProcDat_
ID
Process data index for the physical variable which was read out using input data
word 3.
Channel_
ID
Simple
process
image
Always 0
(With the simple process image the channel index has no significance.)
Flexible
process
image
Channel index for the channel from which a measured value was read
out using input data word 3
Err_L3
0:
The voltage between L3 and N is greater than the set undervoltage
threshold.
1:
The voltage between L3 and N is less than the set undervoltage
threshold. The LED „F“ lights up.
Reg_Com
0:
Process data communication
1:
Register communication
Pos: 68 /Dokum entat ion all gemei n/Gli eder ungsel eme nte/---Seit en wechs el--- @ 3\mod_1221108045078_0.docx @ 21810 @ @ 1