WAGO SYSTEM 750 - Configuration with WAGO-I;O-CHECK; Figure 15: WAGO-I;O-CHECK User Interface, Bus Node with I;O Module

58 Commissioning WAGO-I/O-SYSTEM 750
750-493 3-Phase Power Measurement Module
Manual
Version 1.2.0
8.1 Configuration with WAGO-I/O-C HECK
Right-click on the image of the I/O module and select the [Settings] menu item.
See the figure below:
Figure 15: WAGO-I/O-CHECK User Interface, Bus Node with I/O Module
The "3-phase power measurement" dialog opens. See figure below.