WAGO SYSTEM 750 - 10 Appendix; CSV Data File Snapshot

78 Appendix WAGO-I/O-SYSTEM 750
750-493 3-Phase Power Measurement Module
Manual
Version 1.2.0
Pos: 98 /Al l e Ser ien (Al lg emei ne M od ule)/Ü b ersc hrif te n für all e S eri en/A nha ng - Z ube hör/ Anh ang - Über schr ift 1 @ 4\mod_1239874070437_21.docx @ 30560 @ 1 @ 1
10 Appendix
Pos: 99 /S eri e 7 50 ( WA GO-I/O- SYST EM) /An hang / Beis piel e für C SV-D ateie n 750-49 3 @ 14\mod_1363161491209_21.docx @ 114320 @ 22 @ 1
10.1 CSV Data File “Snapshot”
The following table is an example CSV data file generated in WAGO-I/O-
CHECK with the function [Snapshot].
All actual measured values and set parameters are listed.
7/30/2013 11:50:46 AM
WAGO
Kontakttechnik
GmbH & Co. KG
I/O-Check-
3 Phase
Power
Measurement
(1.3.3.366)
0750-0493
/0000-0000
Measurements
Current (eff.) L1 0.261 A
Current (eff.) L3 0.188 A
Current (eff.) L2 0.48 A
Voltage (eff.) L1-N 230.4 V
Voltage (eff.) L2-N 230.4 V
Voltage (eff.) L3-N 230.4 V
Active Power L1 38.1 W
Active Power L2 18 W
Active Power L3 -25.8 W
cos phi L1 0.75
cos phi L2 0.11
cos phi L3 -0.84
Frequency L1 50 Hz
Frequency L2 50 Hz
Frequency L3 49.9 Hz
Minimum Current (eff.) L1 0.162 A
Minimum Current (eff.) L2 0.107 A
Minimum Current (eff.) L3 0.378 A
Maximum Current (eff.) L1 3.049 A
Maximum Current (eff.) L2 4.727 A
Maximum Current (eff.) L3 25.615 A
Minimum Voltage (eff.) L1-N 0 V
Minimum Voltage (eff.) L2-N 0 V
Minimum Voltage (eff.) L3-N 0 V
Maximum Voltage (eff.) L1-N 230.6 V