WAGO SYSTEM 750 - Phase L1, Phase L2, Phase L3 Tabs; Figure 19: Phase L1 Tab

62 Commissioning WAGO-I/O-SYSTEM 750
750-493 3-Phase Power Measurement Module
Manual
Version 1.2.0
8.1.2 "Phase L1”, “Phase L2”, “Phase L3” Tabs
Use the "Phase L1", "Phase L2", "Phase L3" tabs to configure user scaling,
energy, min.-/max. values and general parameters. These settings are saved to the
I/O module.
Figure 19: "Phase L1" Tab