The change password page will be displayed if you don’t change the default password when
you login the system for the first time.
Step 2 Enter the old password, new password, and confirmation password.
Step 3 Click Apply.
If the message "Modify success" is displayed, click OK, the NVR restarts and the
password is successfully changed. If the password fails to be changed, the cause is
displayed. (For example, the new password length couldn’t be less than eight.)
3.8 Adding Webcams
PoE
After the PoE network interfaces are connected to IP cameras, the NVR automatically
adds the IP cameras.
Figure 3-9 shows the network topology of 2 HDD& 8 channels NVR.
Figure 3-9 Network topology of the NVR
---End
To Next Page
Loading...
Need help?
General
