EasyManuals Logo

WBOX Technologies 0E-4CHNVR2TB User Manual

WBOX Technologies 0E-4CHNVR2TB
97 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #40 background imageLoading...
Page #40 background image
8 Setting
Network Video Recorder(NVR)
User Manual
32
Issue V1.0 (2018-05-11)
Cameras Supported
Disks Supported
Among the preceding parameters, only Device Name can be modified.
The device information is updated automatically when the NVR is upgraded and keeps
consistent with the software version of the NVR.
8.2 Device
8.2.1 Network
On the Network interface, you can view the DHCP IP address (automatically obtained
IP address) of the NVR and set the IP address, subnet mask, preferred DNS server, and
alternate DNS server of the NVR.
If the NVR is deployed on a local area network (LAN), avoid an IP address conflict
between the NVR and any PC on the LAN and ensure that the IP addresses of network
interfaces 1 and 2 of the NVR are in different network segments.
Operation procedure
Step 1 Choose Setting>NVR Setup>Device >Network.
The Network interface appears, as shown in Figure 8-2.

Other manuals for WBOX Technologies 0E-4CHNVR2TB

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the WBOX Technologies 0E-4CHNVR2TB and is the answer not in the manual?

WBOX Technologies 0E-4CHNVR2TB Specifications

General IconGeneral
BrandWBOX Technologies
Model0E-4CHNVR2TB
CategoryDVR
LanguageEnglish

Related product manuals