8.5 Record
8.5.1 Record Policy
On the Record Policy interface, you can set scheduled record, record audio, storage
policy.
Step 1 Choose Setting>NVR Setup>Record>Record Policy.
The Record Policy interface appears, as shown in Figure 8-21.
Figure 8-21 Record Policy interface
Step 2 Check the box preceding the device on which scheduled recording and alarm recording
need to be enabled and select the corresponding code stream for recording.
Step 3 Click .
The Record Policy setting interface appears, as shown in Figure 8-22, which provides
detailed configuration of video recording.
To Next Page
Loading...
Need help?
General
