Figure 5-2 PTZ control menu
In the PTZ control area, you can perform the following operations:
Slide the slider left or right beyond the PTZ rotation keys, you can adjust the PTZ
rotation speed.
Click the arrows on the to move the PTZ in eight directions.
Click or to adjust the focal length.
Click or to adjust the aperture.
Click or to focus.
Click to set due north direction.
Click to enable automatic prime function.
In the PTZ configure area, you can perform the following operations:
The PTZ control menu takes effect only for high-speed domes and external PTZ cameras.
To close the PTZ setup menu, click on the PTZ control interface.
To exit the PTZ control menu, click on the PTZ control interface.
To Next Page
Loading...
Need help?
General
