WBOX Technologies 0E-4CHNVR2TB - Page 55

Setting
Network Video Recorder(NVR)
User Manual
Issue V1.0 (2018-05-11)
47
Figure 8-10 OSD interface
Step 2 Set the parameters according to Table 8-6.
Table 8-6 OSD parameters
Parameter
Description
Setting
Channel ID
ID of the video output channel.
[Setting method]
Select a value from the
drop-down list box.
Area ID
ID of the OSD area.
[Setting method]
Select a value from the
drop-down list box.
OSD font Size
Set the font size.
[Setting method]
Select a value from the
drop-down list box.
[Default value]
Auto
Device Name
Indicates whether to display the
device name on videos.
[Setting method]
Select “Device Name” from
the drop-down list box and
click .