Weatherdock EasyTRX 3 - 14 Error Codes;Warning Codes

Weatherdock AG Seite 75
www.easyAIS.com
14 Error Codes/Warning Codes
Code
Group
Text
Meaning
001
Error
AIS: TX malfunction
002
Error
AIS: Antenna VSWR exceeds
limit
please check coaxial cable to your antenna
and also connectors, too much power is
reflected and that error is generated
003
Error
AIS: RX channel 1 malfunction
no AIS reception on Channel A, 161.975MHz
004
Error
AIS: RX channel 2 malfunction
no AIS reception on Channel B, 162.025MHz
005
Error
AIS: RX channel 70
malfunction
007
Error
AIS: UTC Sync invalid
no GPS position
026
Error
AIS: no GPS since 30min
no GPS position
029
Error
AIS: no valid SOG information
no GPS position
030
Error
AIS: no valid COG information
no GPS position
050
Warning
AIS: GPS: no valid fix
no GPS position
051
Warning
AIS: High supply voltage
supply voltage more than 31.2V in idle mode
054
Warning
AIS: Base station has stopped
TX
AIS Base station stopped your AIS
Transmission within an local area, will be
activated after a while or when you leave
that area.
055
Warning
AIS: No MMSI
Due to no programmed MMSI, there is no AIS
transmission, please fill in your MMSI
072
Error
AIS: low supply voltage
supply voltage less then 9,6V in idle mode
073
Error
AIS: low supply voltage while
sending
due to thin cable or bad battery, the voltage
drops on AIS transmission
077
Error
AIS: Device overheated
unit is getting too warm and will shut down
e.g. WiFi to reduce currend and cooling down
078
Error
AIS: Baseband fail