WEG CFW701 - Normativas Atendidas; Certificaciones

CFW701 | 91
Español
Especificaciones Técnicas
8.3 NORMATIVAS ATENDIDAS
Tabla 8.2: Normativas atendidas
NORMAS DE
SEGURIDAD
 UL 508C - Power Power conversion equipment.
Nota: Adecuado para instalación en ambiente con aire acondicionado.
 UL 840 -Insulation coordination including clearances and creepage distances
for electrical equipment.
 EN61800-5-1 - Safety requirements electrical, thermal and energy.
 EN 50178 - Electronic equipment for use in power installations.
 EN 60204-1 - Safety of machinery. Electrical equipment of machines. Part 1:
General requirements.
Nota: Para tener una máquina en conformidad con esa normativa, el fabricante
de la máquina es responsable por la instalación de un dispositivo para la parada
de emergencia y un equipamiento para seccionar la red eléctrica.
 EN 60146 (IEC 146) - Semiconductor converters.
 EN 61800-2 -Adjustable speed electrical power drive systems - Part 2: General
requirements - Rating specifications for low voltage adjustable frequency AC
power drive systems.
NORMAS DE
COMPATIBILIDAD
ELECTROMAGNÉTICA
(EMC)
 EN 61800-3 - Adjustable speed electrical power drive systems - Part 3: EMC
product standard including specific test methods.
 CISPR 11 -Industrial, scientific and medical (ISM) radio-frequency equipment
– Electromagnetic disturbance characteristics - Limits and methods of
measurement.
 EN 61000-4-2 -Electromagnetic compatibility (EMC) - Part 4: Testing and
measurement techniques - Section 2: Electrostatic discharge immunity test.
 EN 61000-4-3 -Electromagnetic compatibility (EMC) - Part 4: Testing and
measurement techniques -Section 3: Radiated, radio-frequency, electromagnetic
field immunity test.
 EN 61000-4-4 -Electromagnetic compatibility (EMC) - Part 4: Testing and
measurement techniques - Section 4: Electrical fast transient/burst immunity
test.
 EN 61000-4-5 -Electromagnetic compatibility (EMC) - Part 4: Testing and
measurement techniques - Section 5: Surge immunity test.
 EN 61000-4-6 -Electromagnetic compatibility (EMC) - Part 4: Testing and
measurement techniques - Section 6: Immunity to conducted disturbances,
induced by radio-frequency fields.
NORMAS DE
CONSTRUCCIÓN
MECÁNICA
 EN 60529 - Degrees of protection provided by enclosures (IP code).
 UL 50 - Enclosures for electrical equipment.
8.4 CERTIFICACIONES
Certificaciones
(*)
Observaciones
UL y cUL E184430
CE
IRAM
C-Tick
EAC
Functional Safety
(Seguridad funcional)
Función STO, con certificado emitido por TÜV Rheinland.
(*) Para información actualizada sobre certificaciones consultar a WEG.