Weidmüller AC SMART VALUE Socket - Page 88

Networking and conguring the EV charging box
88
Operating instructions – AC SMART
Changing a password
As a User, you can only change your own password. As an Admin, you can
change all passwords.
► Click Network/General.
► Change the password.
► Click Save.
Connecting the EV charging box to an existing WLAN
You can connect the EV charging box to a WLAN network. You can search for
available WLAN networks, or manually enter a known WLAN network.
Searching for WLAN networks
► Click Network/WiFi.
► Click Start.
All networks that are found will be displayed in a drop down menu.
► Select your network and click Select.
YournetworkwillbedisplayedintheeldSSID.
► Enter the network password.
► Click Save.
► To connect to the network, click Connect.
► Click Refresh to refresh the page.
Entering the WLAN network manually
► Enter the SSID for your WLAN network.
► Enter the network password.
► Click Save.
► To connect to the network, click Connect.
► Click Refresh to refresh the page.
ThenewlyassignedIPaddresswillbedisplayedintheeldIP address. You
can access the web server of the EV charging box using this IP address in
your WLAN network.
Displaying LAN connection and setting DHCP
► Click Network/Local.
► Enter new network data if desired.
► If desired, activate DHCP.
► Click Save.
Changing the name of the EV charging box
► Click Network/General.
► Change the name.
► Click Save.
The change is adopted the next time the EV charging box is restarted.
► Click Restart.