Important notice
12
5661290000/00/06.08
2.1 Application
Individualized marking of equipment can be quickly
and conveniently carried out using the PrintJet PRO
ink-jet printer. The PrintJet PRO uses a brilliant
permanently-readable printing process to print
MultiCard-formatted markers for switching devices,
machines, terminal blocks, cables, conductors and
valves. The PrintJet PRO is the reference ink-jet
printer for industrial labelling.
A secure and permanent label is made possible by
ultimate resistance to wiping and scratching, UV-
stability, and high printing resolution for all MultiCard
markers.
The PrintJet PRO allows you to print very small
fonts, graphics, logos and even images. Even the
smallest diagrams are easy to read - permitting you
to increase the marker's information density.
Weidmüller’s warrantee does not cover faults or
damage to the printer resulting from the use of non-
approved or unsuitable accessories or consumable
materials.
Furthermore, Weidmüller can make no guarantee for
the printing quality and resistance when third-party
products such as markers or inks are used.
CAUTION!
Someone should always monitor the
printer as it is running!
2.2 Symbol explanation
CAUTION!
Warning - Mind your hands!
Do not reach inside.
CAUTION!
Warning – Hot surface!
Do not touch.
CAUTION!
Warning – Starts up automatically!
Insert as shown
Please insert the MultiCards with the project marker
surface facing the feed-in direction.
Figure 1 Insertion instructions
To Next Page
Loading...
