Weidmüller PrintJet PRO - Included in Delivery; Setup

Initial commissioning
5661290000/00/06.08
27
4.2 Included in delivery
After you have taken the PrintJet PRO and all ac-
cessories from the packaging, make sure that you
have all of the following parts:
• PrintJet PRO printer
• Power cord
• USB cable
• Quick Installation Guide
• Printer driver and software CD (M-Print
®
PRO,
driver, manuals …)
• MultiCard markers: 2 cards DEK 5/5 MC
• 4 ink-cartridge carriers
• Output rail
The delivery does not include:
• LAN cable
• Ink cartridges:
Variant 1:
black starter kit, order number: 1027090000
Variant 2:
colour starter kit, order number: 1027110000
NOTE
Run through the commissioning proce-
dure as detailed in the instructions be-
fore turning on the printer!
4.3 Setup
Select a suitable location for the setup, considering
the following factors:
• Place the PrintJet PRO on a flat, stable surface
larger than the base area of the printer.
• The PrintJet PRO will not operate properly if it is
tilted or at an angle.
• Ensure there is sufficient space to allow the Multi-
Cards to be ejected without hindrance from the
PrintJet PRO.
• Avoid installing the PrintJet PRO in any location
where it is subject to rapid changes in temperature
and humidity.
• Ensure that the PrintJet PRO is not exposed to di-
rect sunlight, strong light or excessive heat.
• Avoid locations subject to impact shocks or vibra-
tions. Do not place on a table joined to other tables
to avoid the transmission of vibration.
• Do not install the device in dust-filled surround-
ings.
• When installing, ensure that the PrintJet PRO is
sufficiently ventilated on all sides.
• Install the PrintJet PRO near a socket outlet, en-
suring that the plug can be easily removed at all
times.
Dimensions of the printer system (including the out-
put rail)
L x W x H, approx. 1270 x 500 x 300 mm.
Weight: approx. 32 kg
NOTE
Observe recommended minimum dis-
tance! Install the printer on a freely ac-
cessible, sturdy, level surface.