Weidmüller PrintJet PRO - Transport and Shipment

Maintenance
5661290000/00/06.08
85
9 Press the [Menu] key
10 Use the arrow keys to select 'System' then press
'Enter'.
11 Confirm the following display texts:
M e n u :
S y s t e m
S y s t e m :
I n k C U R e p l a c e
O v e r f l o w m a y
o c c u r i f U n i t i s
n o t r e p l a c e d.
R e s e t c o u n t e r s?
R e s e t c o m p l e t e
P o w e r O f f / O n
12 Switch the device off then on again.
You can return the full ink collector unit to Weid-
müller for disposal.
9.7 Transport and shipment
NOTE
Please do not throw away the original
packaging.
Always use the original packaging when
transporting the printer over long dis-
tances (for example moving or return-
ing). Only then can the maximum pro-
tection for the printer during transport be
guaranteed.
Preparation:
1 Turn off the printer.
2 Unplug all cables (power cord, interface cable)
from the printer.
3 Remove the remaining MultiCards from the
loader.
4 Remove the ink waste pad and pack this in a
sealable plastic bag. Enclose this along with the
printer.
5 Place the moulded packaging inserts along the
sides.
6 Place the printer carefully into the box. Be certain
to lift the printer using only the recessed grips
provided.
7 Close and seal the box.
NOTE
If you no longer have the original pack-
aging, you can order the packaging kit
from Weidmüller with order number
1027530000.