Important notice
5661290000/00/06.08
15
• The PrintJet PRO should always be transported in
a horizontal position. Improper transport can lead
to leaked ink and contamination or damage to the
printer.
Handling ink cartridges
• Store unopened ink cartridges in a cool and dry
place, preferably in a refrigerator at 4 °C.
• Before using an ink cartridge that has been stored
in a colder place, allow the cartridge to acclimatize
to the room temperature for at least three hours.
• Install ink cartridges immediately after removing
from the packaging. The print quality can be im-
paired if an ink cartridge is left unpacked for any
length of time before use.
• Keep ink cartridges out of reach of children. Never
allow ink cartridges to fall into the hands of chil-
dren. Never allow children to drink from them.
• Always handle used ink cartridges with care, be-
cause a small amount of ink could remain in the
ink supply outlet. If you get ink on your skin, wash
it thoroughly with soap and water.
• Do not shake ink cartridges, as this can cause ink
to leak.
• Do not use ink cartridges beyond the expiration
date printed on the cartridge packaging. For best
results, the ink in the cartridge should be used
within six months of installation.
• Do not take apart or try to refill ink cartridges. This
could result in damage to the print head.
Suitable location for the PrintJet PRO
• Place the PrintJet PRO on a flat, stable surface
larger than the base area of the printer. The Print-
Jet PRO will not operate properly if it is tilted or at
an angle.
• Ensure there is sufficient space to allow the Multi-
Cards to be ejected without hindrance from the
PrintJet PRO.
To Next Page
Loading...
