WEIHONG NK105 - Page 2

上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
3.3 Activate the Axis................................................................................................................................ 17
3.4 Adjust the Port Polarity ................................................................................................................ 18
3.5 Set Pulse Equivalent........................................................................................................................ 19
3.6 Adjust the Axis Direction ............................................................................................................. 20
3.7 Set the Workbench Travel........................................................................................................... 21
3.8 Set the Machine Origin .................................................................................................................. 22
3.9 Set the Spindle .................................................................................................................................... 23
4 Quick Start ........................................................................................................................................................... 24
4.1 Execute Returning to the Machine Origin ......................................................................... 24
4.2 Load a Program File ........................................................................................................................ 25
4.3 Select a WCS ......................................................................................................................................... 27
4.4 Define the Workpiece Origin ..................................................................................................... 28
4.4.1 General NK105 with Four Axes ................................................................................. 28
4.4.2 General NK105 with Double Z Axes ....................................................................... 29
4.5 Set the Tool Number ....................................................................................................................... 30
4.6 Execute Fixed Calibration............................................................................................................ 31
4.7 Start Machining.................................................................................................................................. 32
4.8 Adjust Machining .............................................................................................................................. 32
4.8.1 Adjust the Feedrate Override ..................................................................................... 32
4.8.2 Adjust the Spindle Speed............................................................................................... 33
4.8.3 Execute the Fine Adjustment...................................................................................... 33
4.8.4 Handle the Soft Limit ....................................................................................................... 34
4.8.5 Handle the Hard Limit .................................................................................................... 35
5 Common Operations...................................................................................................................................... 35
5.1 Set the Machining Wizard ........................................................................................................... 35
5.2 Execute Selective Machining ..................................................................................................... 37
5.3 Parse the Simulation Range ....................................................................................................... 38