WEIHONG NK105 - Define the Workpiece Origin; General NK105 with Four Axes

上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
28 / 97
4. Select the target WCS by pressing / , and press .
4.4 Define the Workpiece Origin
The workpiece origin is the origin of all axes in the program file. This operation is
used to define the workpiece origin according to the actual position and do clearing
before machining.
This operation differs in the types of NK105:
• General NK105 with four axes
• General NK105 with Double Z Axes
4.4.1 General NK105 with Four Axes
To define the workpiece origin, do the following:
1. To specify the workpiece origins of X-axis and Y-axis, do one of the following:
– To clear the coordinates of X-axis and Y-axis at the same time, manually
move X-axis and Y-axis to the target position and press .
– To separately clear the coordinate of X-axis or Y-axis, do one of the
following:
• To clear the coordinate of X-axis, manually move X-axis to the
target position and press + .
• To clear the coordinate of Y-axis, manually move Y-axis to the
target position and + .
2. To specify the workpiece origin of Z-axis, do the following:
1. To clear the coordinate of Z-axis, manually move Z-axis to the target
position and press .