WEIHONG NK105 - System Parameters; Operator Parameters; Machining Wizard

上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
55 / 97
7.11 Delete Logs
This operation is used to delete logs when the free space of the disk is not adequate.
To delete logs, do the following:
1. To enter the menu interface, press .
2. To enter the interface of system maintenance, select 7. System Upkeep by
pressing / , and press .
3. Select 8. Delete Log by pressing / , and press .
7.12 Check Disk Space
This operation is used to check total space and used space of the disk, so as to
ensure the free space is adequate.
To check disk space, do the following:
1. To enter the menu interface, press .
2. To enter the interface of system maintenance, select 7. System Upkeep by
pressing / , and press .
3. To check total disk space and used space, select 9. Disk Space by pressing
/ , and press .