上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
21 / 97
3.7 Set the Workbench Travel
The workbench travel refers to the valid motion range of a machine tool, namely
valid machining ranges of all axes.
NK105 sets the upper / lower limit of workbench travel as the soft limit, so the
workbench travel needs to be identical with the actual dimension. Otherwise, limit
overrun and axis crash may occur. If the machining range specified in the program
file exceeds the workbench travel, there will be a prompt box about the soft limit.
About handling the soft limit, see Handle the Soft Limit.
To set the workbench travel, do the following:
1. To enter the menu interface, press .
2. To enter the interface of manufacturer parameters, select 5. Mfr Param by
pressing / , and press .
3. To check the upper / lower limit of workbench travel, select 4. Machine Stroke
by pressing / , and press .
4. To set the upper / lower limit of workbench travel, select Strk Upper Lmt or
Strk Lower Lmt by pressing / , and input the target value
with the handheld box. The prompt The parameters are modified. Restart?
appears.
5. To validate the setting, press . NK105 automatically restarts.
To Next Page
Loading...
