WEIHONG NK105 - Axis Output Direction; Pulse Equivalence; Workbench Travel

上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
71 / 97
9.1.12 Red Light
Process End Tip
• Unit: -
• Range: Yes; No
• Default value: No
• Effective: Immediately
• Description: Whether the red light turns on for prompt at process ends.
9.1.13 Calibration Height
Cali. Height
• Unit: mm
• Range: [0.001,9999]
• Default value: 1
• Effective: Immediately
• Description: The lifting height after calibration.
9.1.14 Tool Compensation
Tool Comp Enable
• Unit: -
• Range: Yes; No
• Default value: No
• Effective: Immediately
• Description: Whether to enable tool compensation.
Tool Comp Type
• Unit: -
• Range: 1; 2; 3
• Default value: 1
• Effective: Immediately
• Description: The mode of tool compensation.
– 1: General mode.
– 2: Intersection mode.
– 3: Insertion mode.