上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
67 / 97
9.1.10 File
Including the following:
• DXF File
• ENG File
• PLT File
9.1.10.1 DXF File
Lifting Height
• Unit: mm
• Range: [0, 99999]
• Default value: 5
• Effective: Immediately
• Description: The lifting height of Z-axis during rapid traverse when a DXF file is
being processed.
Process Depth
• Unit: mm
• Range: [-99999, 0]
• Default value: 0
• Effective: Immediately
• Description: The machining depth for two-dimensional files.
First Point as 0
• Unit: -
• Range: Yes ; No
• Default value: Yes
• Effective: Immediately
• Description: The first point as workpiece origin when a DXF file is processed.
Shape Process
• Unit: -
• Range: Yes ; No
• Default value: No
• Effective: Immediately
• Description: The next shape is not processed until the curr ent shape is finished.
To Next Page
Loading...
