上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
54 / 97
7.9 Restart the System
To restart the system, do the following:
1. To enter the menu interface, press .
2. To enter the interface of system maintenance, select 7. System Upkeep by
pressing / , and press .
3. Select 6. Reboot by pressing / , and press . NK105
restarts.
7.10 Exit the System
This operation is used to exit the system. At that time, the screen goes blank. To
restart the system after exiting the system, you need to power off first and power on.
To exit the system, do the following:
1. To enter the menu interface, press .
2. To enter the interface of system maintenance, select 7. System Upkeep by
pressing / , and press .
3. To exit the system, select 7. Exit by pressing / , and press
.
To Next Page
Loading...
