Specialized Concentrated Focused
Operation「67」
After F4 is pressed, users can edit the current file on the integrated system.
Delete
The shortcut key is F3, only valid under [Program] function section.
Select the file to be deleted, and then press F3 to eject a prompt box, as shown in Fig. 3-56.
Fig. 3-56 Information Prompt Dialog
Pressing the letter Y will delete this program file. (Note: the system will delete this file from the default
system disk. To avoid data loss, if necessary, copy this file to a mobile disk for backup.)
Copy to local
The shortcut key is F5, only valid under [Program] function section.
Pressing F5 will copy the selected file to the mobile disk on the premise that a mobile disk is inserted.
Change to local
The shortcut key is F7.
Pressing F7 will open the program file list in the mobile disk on the premise that a mobile disk is inserted.
New
The shortcut key is F6.
After F6 is pressed, the system will create a new file for compiling a new program.
Related parameters (DXF file)
It sets the tool lifting height during rapid traverse.
It specifies the processing depth for 2D files.
Use first point as zero
point
It sets whether to set the firstly met coordinate
point as zero point when DXF file is processed.
True: Use the first
point as zero point
False: Not use the
first point as zero
To Next Page
Loading...
