Specialized Concentrated Focused
Operation「73」
Fig. 3-62 Registration Code Maker-2
2) Under this interface, press F1 [Register] to eject a dialog, as shown in Fig. 3-63. Then input the
registration code generated in the first step into the pop-up dialog, and then click “OK”.
Fig. 3-63 Registration
3) System prompts “register successfully”.
The ID of NK260 varies with the change of registration times, reflected by the last three figures of serial number.
When registration times is “0”, the last three figures are “000”; when “1”, the last three figures are “001”.
ID (registered times) must be entered.
To Next Page
Loading...
