Weinmann MEDUMAT Standard2 - Page 127

WM 68071 05/2021
MEDUMAT Standard
2
EN 127
6 Operator menu
Exporting data to an SD card
Requirement • An SD card is in the SD card slot.
• The operator menu has been called up (see "6.1 Navigating
the operator menu", page 120).
1. Select the menu item Import/export.
2. Select the Export service data submenu item.
or
Select the Export configuration submenu item.
The device automatically begins to export the desired data to
the SD card.
3. Once the export has concluded: Press the navigation knob ok
to confirm that all of the data has been correctly exported.
4. To leave the operator menu, press the back navigation knob.
5. Remove the SD card (see "4.14.2 Removing the SD card",
page 98).
Result The desired data are on the SD card.
Importing a configuration onto a device
Requirement • There must be an SD card with the desired configuration in the
SD card slot.
• The operator menu has been called up (see "6.1 Navigating
the operator menu", page 120).
1. Select the menu item Import/export.
2. Select the Import configuration submenu item.
The device automatically begins to import the configuration
from the SD card.
3. Once the import has concluded: Press the navigation knob ok
to confirm that the configuration has been correctly imported.
4. To leave the operator menu, press the back navigation knob.
5. Remove the SD card (see "4.14.2 Removing the SD card",
page 98).
Result The desired configuration is now on the device.