Weinmann MEDUMAT Standard2 - Page 191

WM 68071 05/2021
MEDUMAT Standard
2
EN 191
8 Hygienic reprocessing
1. Assemble the patient valve.
When doing so, note:
• the side of the PEEP control diaphragm labeled "TOP" must
face upward toward the control cover.
• the arrow on the control cover must point toward the
patient.
2. If available: Secure the protective cap strap on the patient
valve:
• Position 1
or
• Position 2 (only with reusable breathing circuits with flow
measurement and CO
2
measurement)
3. Connect the patient valve to the ventilation hose.
12