Weinmann MEDUMAT Standard2 User Manual

54 EN MEDUMAT Standard
2
WM 68071 05/2021
4 Preparation and operation
4.4.3 Connecting the FlowCheck sensor
The FlowCheck sensor enables flow measurement (only with Flow
measurement + ASB option).
1. Connect the connector of one of the following connection
lines to the accessories connection on the device:
• FlowCheck sensor connection line
• FlowCheck sensor connection line with MEDUtrigger
2. Connect the FlowCheck sensor to the patient valve.

Weinmann MEDUMAT Standard2 Specifications

General

Brand	Weinmann
Model	MEDUMAT Standard2
Category	Medical Equipment
Language	English