Weinmann MEDUMAT Standard2 User Manual

WM 68071 05/2021
MEDUMAT Standard
2
EN 55
4 Preparation and operation
3. Hook the FlowCheck sensor connector onto the FlowCheck
sensor and push down until it audibly clicks into place.
4. With the reusable breathing circuit: Guide the connection line
with measuring circuit and ventilation hose into the protective
sleeve of the breathing circuit.
5. If necessary: Activate Flow measurement + ASB option
(see "6.3.9 Options", page 138).
Risk of injury from touching the contacts on the FlowCheck
sensor connection line/FlowCheck sensor connection line
with MEDUtrigger and the patient at the same time!
The contacts on the FlowCheck sensor connection line/FlowCheck
sensor connection line with MEDUtrigger are live. Touching the
contacts and the patient at the same time can injure the user or
the patient.
 Do not touch the contacts on the FlowCheck sensor
connection line/FlowCheck sensor connection line with
MEDUtrigger and the patient at the same time.

Weinmann MEDUMAT Standard2 Specifications

General

Brand	Weinmann
Model	MEDUMAT Standard2
Category	Medical Equipment
Language	English