72 EN MEDUMAT Standard
2
WM 68071 05/2021
4 Preparation and operation
7. Select the start field.
Result A ventilation mode for a new patient has been set. If the Curve
display option is activated, the device shows a curve view.
4.7.4 Selecting an emergency mode from a
ventilation mode
Requirement • The device is switched on.
• A ventilation mode is set (exception: CPR, Inhalation,
CO
2
monitoring).
1. Select the field for the emergency mode using the right-hand
navigation knob.
2. Select emergency mode:
• Emergency Infant
• Emergency Child
• Emergency Adult
To Next Page
Loading...
