English
Installation and operating instructions Wilo-Control SC-Booster (SC, SC-FC, SCe) 7
5Product information
5.1 Type key
5.3 Scope of delivery
• SC-Booster switchgear
• Circuit diagram
• SC-Booster installation and operating instructions
• Frequency converter installation and operating
instructions (only for the SC-FC version)
• Test report in accordance with EN 60204-1
5.4 Accessories
Accessories must be ordered separately:
Only one bus option can be active at any
given time.
Example: SC-Booster 2x6,3A DOL FC FM
SC
SCe
Smart Controller for fixed speed
pumps
Smart Controller for electronic
pumps
Booster Pressure boosting application
2x Number of pumps
6.3 A Maximum rated motor current I
1
DOL
SD
NWB
AVC
Pump control:
Direct start (direct online)
Star-delta starting
Digital control (New Wilo Bus)
Analogue voltage control
FC With frequency converter
FM
BM
WM
Switchgear is mounted on the base
frame (frame mounted)
Floor model (base mounted)
Switchgear is mounted on a mounting
bracket (wall mounted)
5.2 Technical data (standard version)
Mains supply voltage [V]: 3~380/400 V (L1, L2, L3, PE)
Frequency [Hz]:
50/60 Hz
Control voltage [V]: 24 VDC; 230 VAC
Max. current consumption [A]:
See rating plate
Protection class:
IP54
Max. fuse protection on mains side [A]: See circuit diagram
Ambient temperature [°C]:
0 to +40 °C
Electrical safety:
Pollution degree II
Option Description
Modbus TCP Connection to Modbus TCP
BACnet MSTP
Connection to BACnet MSTP (RS485)
BACnet IP
Connection to BACnet IP
LON Connection to LON
WiloCare
Connection to internet-based remote maintenance
To Next Page
Loading...