Wilo Control SC-Booster - 6.2.3 Operation of the switchgear

English
Installation and operating instructions Wilo-Control SC-Booster (SC, SC-FC, SCe) 13
6.2.3 Operation of the switchgear
Operating elements
• Main switch on/off (lockable in “off” position)
•The LCD shows the operating statuses of the
pumps, the controller and the frequency con
-
verter. The menu selection and parameter input
are performed using the operating button. Turn
the button to change values or to scroll through a
menu level; press it in order to select and confirm:
Information appears on the display as shown in
the sample illustration below:
Fig. 9: Display structure
NOTICE
• The display backlight is switched off if there is no
operation for 6 minutes.
• The display screen switches to the main screen
after 6 minutes without operation.
• If the red fault LED lights up or flashes immedi
-
ately after activation, observe the error code
information on the display!
• You can find an overview of all symbols in the
appendix!
Item Description
1 Menu number
2
Value display
3
Units display
4
Standard symbols
5
Graphic symbols
4
4
4
1
2
3
5