English
Installation and operating instructions Wilo-Control SC-Booster (SC, SC-FC, SCe) 23
Operating values
Actual value of the output pressure of the system
Active setpoint
SCe
SC…FC
The menu with the current pump speeds
SCe
SC…FC
4.1.3.1
to
4.1.3.4
The current speed for pump 1,2,3,4. Pages are only
displayed for pumps that are installed in the system.
SCe NWB The menu for the current power consumption of the
single pumps
SCe NWB
4.1.4.1
to
4.1.4.4
Current power consumption of pumps 1 – 4. Pages
are only displayed for pumps that are installed in the
system.
SCe NWB The current supply pressure on the supply line
Valid until Display
Description
Parameter range
Factory setting
To Next Page
Loading...