Windhager FireWIN - Page 26

26
2. Operation
5s
RESET
Fig. 57
Boiler temperature
(Operating phases)
Lighting ON
42
°C
5s
RESET
Fig. 58
Boiler temperature
(Operating phases)
Info Menu
42
°C
5s
RESET
Fig. 59
Operator level
Service level
Information level
MES Module
1
Choose Back
5s
RESET
Fig. 60
Boiler cleaning
Time
Feed operating mode
Time profile feed
Probe switching
Time profile ash compression
Choose Back
2.8.1.1 Boiler cleaning –
Resetting the cleaning request
After boiler cleaning has been performed (section 3), boiler
cleaning must be confirmed so that the operating time until
the next boiler cleaning is restarted.
Information!
Without cleaning boiler cleaning must not be
reset.
Pressing one of the six buttons switches the lighting and
display on – Fig. 57.
Press the Menu button – Fig. 58.
Confirm the selected menu item “Operator level” by
pressing the Choose button – Fig. 59.
The arrow buttons select the “Boiler cleaning” sub-menu
– Fig. 60.
1 only displayed when an MESplus control is present and this has been adjusted by
a trained service technician in the basic settings.