Windhager FireWIN - Page 27

27
2. Operation
5s
RESET
Fig. 61
Boiler cleaning
Time
Feed operating mode
Time profile feed
Probe switching
Time profile ash compression
Choose Back
5s
RESET
Fig. 62
Has boiler and burner cleaning
been performed?
Confirm
Yes Back
5s
RESET
Fig. 63
Parameter is saved
(Animated symbol)
5s
RESET
Fig. 64
Boiler cleaning
Time
Feed operating mode
Time profile feed
Probe switching
Time profile ash compression
Choose Back
Confirm the selected “Boiler cleaning” sub-menu by pres-
sing the Choose button – Fig. 61.
Pressing the Yes button resets the boiler cleaning –
Fig.62. The display shows “Parameter is saved” for a few
seconds (Fig. 63) and then changes back to the previous
level – Fig. 64.
The menu item or sub-menu item is exited by pressing the
Back button (Fig. 64) or after a delay of 45 seconds.