Windhager FireWIN - Page 28

28
2. Operation
5s
RESET
Fig. 65
Boiler temperature
(Operating phases)
Lighting ON
42
°C
42
°C
5s
RESET
Fig. 66
Boiler temperature
(Operating phases)
Info Menu
42
°C
42
°C
5s
RESET
Fig. 67
Operator level
Service level
Information level
MES Module
1
Choose Back
5s
RESET
Fig. 68
Boiler cleaning
Time
Feed operating mode
Time profile feed
Probe switching
Time profile ash compression
Choose Back
2.8.1.2 Setting the time
This time is used for the time control of the pellet feed and
for automatic heating surface cleaning.
If the FireWIN is operated with an MESplus control, the time
is automatically adopted from the module and the time set
here is overwritten.
If the FireWIN is operated with REG standard control, the
time must be set here too.
Pressing one of the six buttons switches the lighting and
display on – Fig. 65.
Press the Menu button – Fig. 66.
Confirm the selected menu item “Operator level” by pres-
sing the Choose button – Fig. 67.
Use the arrow buttons to select the „Time“ sub-menu item
– Fig. 68.
1 only displayed when an MESplus control is present and this has been adjusted by
a trained service technician in the basic settings.