Windhager FireWIN - Page 33

33
2. Operation
5s
RESET
Fig. 87
Feed with enable time
Start 07:00
End 22:00
Save Back
5s
RESET
Fig. 88
Feed with enable time
Start 07:00
End 22:00
Choose Back
5s
RESET
Fig. 89
Feed with enable time
Start 07:30
End 22:00
– Save Back +
Confirm the selected sub-menu “Time profile feed” by
pressing the Choose button – Fig. 87.
“with enable time”
The start and end of the enable time can be set here in the
“Time profile feed” menu item if the “with enable time”
setting is active in the “Feed operating mode” menu item
(see section 2.8.1.3).
Factory setting „Feed with enable time“:
Start 07:00
End 22:00
The arrow buttons select the “Start” or “End” times to be
changed – Fig.88.
Pressing the + or – buttons changes the time in 1 min steps
– Fig. 90.
Confirm the selected time by pressing the Choose button
– Fig. 89.
5s
RESET
Fig. 90
Boiler cleaning
Time
Feed operating mode
Time profile feed
Probe switching
Time profile ash compression
Choose Back