What to do if the grate shaking is defective in Windhager Boiler?
If the grate shaking is defective on your Windhager Boiler, it means the shaker motor no longer moves or reaches the end position. Clean the burner pot to resolve this issue.
What does 'Internal error occurred' mean on my Windhager Boiler?
If the Windhager Boiler displays 'Internal error occurred', a reset is performed automatically after 1 minute if this error occurs.
What to do if the monitoring of the auger conveyor is defective on Windhager FireWIN Boiler?
If the monitoring of the auger conveyor is defective on your Windhager Boiler, press the Reset button.
What to do if wand switching is defective on Windhager FireWIN Boiler?
If the wand switching is defective on your Windhager Boiler, no pellet feed is possible, and the boiler does not operate. Press the Reset button.
Details on caution symbols and safety instructions for operation.
Identifies potential hazards like fire, power failure, and burner pot issues.
Explains various operational modes like OFF, ON, Pellet feed, and Solid fuel/buffer.
Provides a summary of cleaning and ash removal intervals for different FireWIN models.
Covers cleaning procedures for the combustion chamber and burner pot.
Troubleshooting steps for when the InfoWINplus display is not working.
Explains common IN messages related to pellet supply and boiler status.
Details FE messages related to auger, feed, probe switching, and pressure.
Covers AL messages related to ash removal, auger, fan, air intake, and safety switches.
To Next Page
General
