4.5 Using Barcode Reader
Notice that Barcode Reader is an optional feature for M101BK Tablet and may not be present in your
device.
4.5.1 Scanning a Barcode
To enable the Barcode Reader:
1.
Long-press Fn + F1 function key to open Win-Set®. Users also can open Win-Set ® by
double-clicking on the Win-Set icon on the desktop
2.
Click on the Device Control tab under the Win-Set utility and open the Barcode Scanner Wedge
Settings.
3.
Choose “Device ON/OFF” and click on “Barcode”, and the setting utility will show up as below:
4.
Tap on the ON button.
5.
Open the application where barcode reader will be displaying the scanned barcode. Trigger the
barcode reader by pressing Fn2 function key on the back of M101BK.
To Next Page
Loading...
