Winmate M101BK - UHF RFID Settings

38
Chapter 4: Operating the Device
4.8.4 UHF RFID Settings
You can define the UHF RFID settings.
Item
Description
Sound
The Sound check box defines whether a beep sound will come
with the data scanning.
Region
Basing on different regional regulations about UHF RFID frequencies,
user can switch frequency to NA (North America, 902-928 MHz) or EU3
(Europe, 865-868 MHz) from the drop-down menu shown as below.
Output to
This setting defines the output type of the scanned data. Two options are
available: Keyboard Wedge, SDK
UHF RFID Output