The default setting for UHF RFID trigger is Auto Scan. Under this setting, the UHF
RFID Reader will always be ready to scan tags.
1.
When the UHF RFID tag is detected, the data will be read automatically.
2.
User can define the UHF RFID scanning frequency from the drop-down menu
shown as below. The frequency can be from 1 second to 9 seconds.
User can also define the UHF RFID Reader scanning as SINGLE SCAN. Under this
setting, the UHF RFID Reader will be triggered only when user click on “Send”.
To Next Page
Loading...
