Winmate M101BK - Page 31

30
Chapter 4: Operating the Device
More Settings
Tap on the Settings button for further details settings.
Item
Description
Prefix
User can type in this field to define the characters
BEFORE the data scanned.
Suffix
User can type in this field to define the characters AFTER
the data scanned.
Append Enter
The check box user can defines to append an “Enter”
which is followed by the characters.
Append TAB
The check box user can defines to append an “TAB” which
is followed by the characters.
Regex Filter
Press on “Presets…” button, user can define how many characters to
show after the data scanned.
Replace
User can define specific characters to be replaced with preferred characters
automatically. When the characters defined in Regex Substitution is
scanned, the data will be replaced with the one filled in Replace with.
Reset to
default
User can remove all the set up and back to default mode.