About this manual TPM
+
en-6 4022-D018396 Revision: 07
1.3 Design of the safety instructions
The safety instructions of these instructions are designed according to the following pattern:
1.4 Information symbols
The following information symbols are used:
Indicates an action to be performed
Indicates the results of an action
Provides additional information on handling
Electric voltage Flammable Harmful to the
environment
Information
Component sensitive
to electrostatic
discharge
A = Safety symbol (see Chapter 1.2 "Safety symbols")
B = Signal word (see Chapter 1.1 "Signal words")
C = Type and consequence of the danger
D = Prevention of the danger
To Next Page
Loading...