WMF 1000 - Page 16

14
Start-up program
Start-up complete
Setup is now complete. All settings can be changed now, or at a later time.
The following setting options are available:
Set cup size•
Beverage setting•
• Basic settings
Grinding degree setting•
For perfection in your preparation of coffee we have compiled a chapter of “Tips and Tricks”.
Switching on and off
When switching the machine on and off, an automatic coffee system rinse starts
automatically. This requires that sufficient water be in the tank at all times.
Empty the drip tray regularly, since the rinse water (approx. 120 ml) runs into the drip tray
through the All-in-One spout. You can place a container under the All-in-One spout to
catch the rinse water.
About the timer: Switching on and off
The coffee machine automatically switches itself off at a pre-set time. In this circumstance
as well, the machine performs a coffee system rinse directly before switching off.
Empty the drip tray regularly, since the rinse water (approx. 120 ml) is emptied into the drip
tray through the All-in-One spout. You can place a container under the All-in-One spout to
catch the rinse water.
w Set grinding degree
Page 30
w Tips and Tricks for Perfect
Coffee Beverages
Page 50
Setting automatic switch off time after
last beverage dispensing
w Settings w Basic settings
Page 32