WMF Presto User Manual

10
User Manual WMFpresto!
Operation
Chapter 2 Operation
A display-guided installation program helps perform initial
start-up after delivery from the factory.
2.1 Switch on coffee machine
 Press the ON/OFF button and hold for more than
2seconds
Coffee machine switches on and heats up.
When the coffee machine is ready to dispense beverages,
the “Ready to operate” display appears.
2.2 Beverage dispensing
Pressing the beverage buttons triggers dispensing of the
beverage selected.
• Lit up button = ready to dispense
• Flashing button = beverage dispensing
• Unlit button = not ready to dispense/
button disabled
 Place asuitably sized cup below the combi spout
 Press the desired beverage button
Desired beverage and progress of dispensing are indicated
on the display.
2.3 Decaf button (optional)
Preparation of adecaffeinated coffee beverage from the
decaf grinder:
 Press the Decaf button
 Press the desired beverage button
The steam dispensing option is not available with the decaf
option.
Initial start-up
w Installation Instructions
PIN access control
w Software
w Settings
w Operating options
page 33
w Timer program
page 20
Caution
Hot liquids in the
dispensing area.
Observe the Safety chapter.
Button allocation
w Software w Settings
w Recipes and buttons
page 28

WMF Presto Specifications

General

Brand	WMF
Model	Presto
Category	Coffee Maker
Language	English