Operation
2.4 Milk or milk foam (optional)
2.4.1 Dispense milk or milk foam
Press the beverage button assigned to milk or milk foam
Dispensing occurs. Dispensing runs for as long as the
button is held.
2.4.2 Connect up the milk
Use asuitable milk nozzle on the combi spout.
• green milk nozzle = with acooler,
milk temperature 4–8°C
• white milk nozzle = milk temperature 8–16°C
Standard
Insert the milk nozzle into the milk connection on the
combi spout
Pull the milk cover forward and out
Open the milk package so that milk does not pour out
when it is lying on its narrow side
Insert the milk hose with the beige milk nozzle into the
milk pack
Slide the milk package carefully into the milk
compartment
The hose must not be under tension or bent when
adjusting the height of the combi spout.
Replace milk cover
With WMFCooler, WMFCup&Cool (optional)
Insert the milk nozzle for cooled milk into the milk
connection on the combi spout
Remove the milk container out of the cooler
Push the milk container lid back
Pour milk into the milk container
Place the lid back on the container
Insert the adapter on the milk hose into the connection
in the milk container lid
Push the milk container back in carefully
The milk hose is inserted into the adapter.
Standard version
Cooler version
Cooler milk container
Cooler adapter
To Next Page
Loading...
Need help?
General
