Other settings
Chapter 4 Other settings
4.1 Mechanical settings
4.1.1 Set grinding degree
Remove bean hoppers
Preset grinding degree is now visible.
Release coffee dispensing and wait until grinder starts
up
With grinder running, alter grinding degree as desired
on the side of the coffee machine using the multitool
Left grinder Right grinder
Grinding degree 1
g fine
Grinding degree 1
g fine
Grinding degree 6
g coarse
Grinding degree 6
g coarse
Bruising or crushing hazard.
Never reach into the grinders with coffee machine
running and product hoppers removed.
4.1.2 Aquaflex (optional) Switching between the
constant water supply and the water tank
Turn the position screw behind the water tank to the
desired position using the multitool. The sticker provides
areference.
Arrow pointing left = water tank
Arrow pointing right = constant water supply
Caution
Bruising or crushing
hazard.
Observe the Safety chapter.
w Messages
page 54
To Next Page
Loading...
Need help?
General
